Upper section, Zinc + RCP 360 tower
- Anchoring system with union nuts
- Fully automated soldering
- 360 tower maximum height: 57 m (as per calculation conditions)
- Zinc coating + RCP
- Grey finish
- Mast max. diameter: 52 mm
| Surface facing the wind | m² | 0.4 |
|---|
Physical data
Net weight: 23,000 g
Gross weight: 23,000 g
Width: 375 mm
Height: 2,962 mm
Depth: 325 mm
Main product weight: 19,219 g
Packing
Unit 1 Units
| tlv_reflog | TOBER360 | |||
|---|---|---|---|---|
| tlv_tabla_especificaciones |
|
|||
| tlv_ean | 8424450136652 | |||
| tlv_dim_product_x | 375 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 2,962 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 325 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 19,219 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 23,000 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 23,000 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.