Lower section pivoting, Zinc + RCP 360 tower
Guy wires are required for pivoting sections.
- Anchoring system with union nuts
- Fully automated soldering
- 360 tower maximum height: 57m (as per calculation conditions)
- Zinc coating + RCP
- Grey finish
| Surface facing the wind | m² | 0.426 |
|---|
Physical data
Net weight: 23,000 g
Gross weight: 23,000 g
Width: 375 mm
Height: 3,070 mm
Depth: 325 mm
Main product weight: 21,989 g
Packing
Unit 1 Units
| tlv_reflog | TFUSS360 | |||
|---|---|---|---|---|
| tlv_tabla_especificaciones |
|
|||
| tlv_ean | 8424450136683 | |||
| tlv_dim_product_x | 375 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 3,070 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 325 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 21,989 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 23,000 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 23,000 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.
-
Product release brochure
3058_3088_3089_3085_3086_3087_308601_308701_308702_308501_New-Product_EN_[PLA03170101].pdf
(0.52 MB) -
Technical specifications
technical_specifications_en_US_TEC05210159_3086.pdf
(0.11 MB) -
Product Sheet
3086_en_US_product_sheet_PSH01230575.pdf
(0.25 MB) -
User Manual
MUS10240000_001_ES-EN-ENUS.pdf
(1.38 MB)