EasyF 2W Mini-Splitter 5...2400 MHz 4.3 dB/4 dB
Conceived for indoor installation, it can also be used outdoors with a case (ref. 417801).
- EasyF connection system: easy to install, savings on mounting
- Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new generation micro-components
- Improves through losses
- Outstanding electrical behaviour: impulsive noise reduction
- Grounding screw provided
- DC pass from the outputs to the input
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device's cover to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
| Frequency range | MHz | 5 ... 2400 | ||
|---|---|---|---|---|
| Number of outputs | 2 | |||
| Inputs/Bands |
| |||
| Through losses | dB |
| ||
| Rejection between outputs | dB |
| ||
| Connectors | "EasyF" type | |||
| Voltage max. | V | 40 | ||
| Max. current | mA | 300 | ||
| DC pass | Out→In |
Physical data
Net weight: 53 g
Gross weight: 53 g
Width: 57 mm
Height: 46 mm
Depth: 11 mm
Main product weight: 53 g
Packing
Bag 1 Units
Box 8 Units
| Frequency range | MHz | 5 ... 2400 | ||
|---|---|---|---|---|
| Number of outputs | 2 | |||
| Inputs/Bands |
| |||
| Through losses | dB |
| ||
| Rejection between outputs | dB |
| ||
| Connectors | "EasyF" type | |||
| Voltage max. | V | 40 | ||
| Max. current | mA | 300 | ||
| DC pass | Out→In |
Physical data
Net weight: 165 g
Gross weight: 165 g
Width: 57 mm
Height: 46 mm
Depth: 12 mm
Main product weight: 55 g
Packing
Blister 1 Units
Box 10 Units
| Frequency range | MHz | 5 ... 2400 | ||
|---|---|---|---|---|
| Number of outputs | 2 | |||
| Inputs/Bands |
| |||
| Through losses | dB |
| ||
| Rejection between outputs | dB |
| ||
| Connectors | "EasyF" type | |||
| Voltage max. | V | 40 | ||
| Max. current | mA | 300 | ||
| DC pass | Out→In |
Physical data
Net weight: 54 g
Gross weight: 54 g
Width: 57 mm
Height: 46 mm
Depth: 11 mm
Main product weight: 54 g
Packing
Box 10 Units
| tlv_reflog_group_search | EFV2T,EFV2GB,EFV2N | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tlv_tags | EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
1. Unscrew the device's cover to access the connection 2. Insert the previously stripped coaxial cables 3. Close the cover and screw to ensure connection Learn more about EasyF system reliabilityWith EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
|
|||||||||||||||||||||||||||||||||
| tlv_tabla_especificaciones |
|
|||||||||||||||||||||||||||||||||
| tlv_sku_group_search | 432803,434103,543503 | |||||||||||||||||||||||||||||||||
| tlv_diferencias | Complement: Splitter | |||||||||||||||||||||||||||||||||
| tlv_dim_product_x | 57 | |||||||||||||||||||||||||||||||||
| tlv_dim_product_x_label | Width | |||||||||||||||||||||||||||||||||
| tlv_dim_product_x_unit | mm | |||||||||||||||||||||||||||||||||
| tlv_dim_product_y | 46 | |||||||||||||||||||||||||||||||||
| tlv_dim_product_y_label | Height | |||||||||||||||||||||||||||||||||
| tlv_dim_product_y_unit | mm | |||||||||||||||||||||||||||||||||
| tlv_dim_product_z | 11 | |||||||||||||||||||||||||||||||||
| tlv_dim_product_z_label | Depth | |||||||||||||||||||||||||||||||||
| tlv_dim_product_z_unit | mm | |||||||||||||||||||||||||||||||||
| tlv_weight_product_label | Main product weight | |||||||||||||||||||||||||||||||||
| tlv_weight_product | 53 | |||||||||||||||||||||||||||||||||
| tlv_weight_product_unit | g | |||||||||||||||||||||||||||||||||
| tlv_gross_weight_label | Gross weight | |||||||||||||||||||||||||||||||||
| tlv_gross_weight | 53 | |||||||||||||||||||||||||||||||||
| tlv_gross_weight_unit | g | |||||||||||||||||||||||||||||||||
| tlv_net_weight_label | Net weight | |||||||||||||||||||||||||||||||||
| tlv_net_weight_unit | g | |||||||||||||||||||||||||||||||||
| tlv_net_weight | 53 | |||||||||||||||||||||||||||||||||
| tlv_1_type_pack | Bag | |||||||||||||||||||||||||||||||||
| tlv_1_type_pcs_pack | Units | |||||||||||||||||||||||||||||||||
| tlv_1_pcs_pack | 1 | |||||||||||||||||||||||||||||||||
| tlv_2_pcs_pack | 8 | |||||||||||||||||||||||||||||||||
| tlv_2_type_pack | Box | |||||||||||||||||||||||||||||||||
| tlv_2_type_pcs_pack | Units |
-
Declaration of Conformity
DOC01220108_0_432803.pdf
(0.21 MB) -
Declaration of Conformity
DOC01220110_0_434103.pdf
(0.21 MB) -
Declaration of Conformity
DOC01220013_0_543503.pdf
(0.21 MB) -
Technical specifications
technical_specifications_en_US_TEC09210021_432803.pdf
(0.11 MB) -
Technical specifications
technical_specifications_en_US_TEC09210023_434103.pdf
(0.11 MB) -
Technical specifications
technical_specifications_en_US_TEC09210119_543503.pdf
(0.11 MB) -
Product Sheet
432803_en_US_product_sheet_PSH01231768_432803.pdf
(0.1 MB) -
Product Sheet
434103_en_US_product_sheet_PSH01231771_434103.pdf
(0.09 MB) -
Product Sheet
543503_en_US_product_sheet_PSH01232171_543503.pdf
(0.1 MB) -
Product release brochure
PLA03170036_TUKTMETSCExport_7921.pdf
(0.87 MB) -
AutoCAD drawing
543503 - REPAR_4_5Db_10_Sin_CAD07180264.dwg
(0.13 MB) -
AutoCAD drawing
543503_CAD03230000.dwg
(0.26 MB) -
Data sheet
DS06170300_006_ES-EN-FR-DE-RU-PT-AR_543503_543509_543603.pdf
(0.99 MB)