EasyF 3W Splitter with UAP 5...2400 MHz 9 dB/8 dB
The UAP (User Access Point) provides an additional input for the second downcomer, as specified by ICT-2 regulation concerning installations.
Conceived for indoor installation, it can also be used outdoors with a case (ref. 4177).
Supplied in 10-unit boxes.
- EasyF connection system: easy to install, savings on mounting
- Made of Zamak, high shielding
- Outstanding reliability: automated manufacturing using new generation micro-components
- Improves through losses
- Outstanding electrical behaviour: impulsive noise reduction
- Grounding screw provided
- DC pass from the outputs to the input
EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
- Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
- Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
- Cost savings: no additional connectors are required (neither F nor IEC)
- Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
- Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device's cover to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to ensure connection
Learn more about EasyF system reliability
With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
- Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
- Failure rate reduction: usually produced as a result of cold soldering joints
- Electromagnetic behaviour optimization: for high frequencies
- Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
| Frequency range | MHz | 5 ... 2400 | ||
|---|---|---|---|---|
| Number of outputs | 3 | |||
| Inputs/Bands |
| |||
| ## | dB |
| ||
| Through losses W2 | dB |
| ||
| Through losses W3 | dB |
| ||
| Rejection between outputs | dB |
| ||
| Connectors | "EasyF" type | |||
| Voltage max. | V | 40 | ||
| Max. current | mA | 300 | ||
| DC pass | Out→In |
Physical data
Net weight: 111 g
Gross weight: 170 g
Width: 80 mm
Height: 55 mm
Depth: 14 mm
Main product weight: 111 g
Packing
Box 10 Units
Bucket 40 Units
| tlv_tags | EasyF connection system: simplicity and savings
EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
1. Unscrew the device's cover to access the connection 2. Insert the previously stripped coaxial cables 3. Close the cover and screw to ensure connection Learn more about EasyF system reliabilityWith EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
|
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tlv_caracteristicas_ficha | Sistema de conexión EasyF: sencillez y ahorro
El EasyF se trata un innovador concepto de conexión del conductor interno del cable coaxial (vivo), que se inserta directamente en el dispositivo aumentando la fiabilidad de la conexión. Además gracias a la ausencia de conectores "F", es posible reducir el chasis y securizar la conexión de dos cables con un único tornillo.
1. Desatornillar la tapa del repartidor para acceder a la conexión 2. Insertar los cables coaxiales previamente pelados 3. Cerrar la tapa y atornillar para asegurar la conexión Descubre más acerca de la fiabilidad del sistema EasyFCon EasyF, la conexión del cable coaxial en el dispositivo se realiza mediante un sistema automatizado de inserción del vivo (conductor interno) por contacto, sin requerir soldadura.
|
|||||||||||||||||||||||||||||||||||||||||||
| tlv_tabla_especificaciones |
|
|||||||||||||||||||||||||||||||||||||||||||
| tlv_ean | 8424450143759 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_x | 80 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_x_label | Width | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_x_unit | mm | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_y | 55 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_y_label | Height | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_y_unit | mm | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_z | 14 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_z_label | Depth | |||||||||||||||||||||||||||||||||||||||||||
| tlv_dim_product_z_unit | mm | |||||||||||||||||||||||||||||||||||||||||||
| tlv_weight_product_label | Main product weight | |||||||||||||||||||||||||||||||||||||||||||
| tlv_weight_product | 111 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_weight_product_unit | g | |||||||||||||||||||||||||||||||||||||||||||
| tlv_gross_weight_label | Gross weight | |||||||||||||||||||||||||||||||||||||||||||
| tlv_gross_weight | 170 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_gross_weight_unit | g | |||||||||||||||||||||||||||||||||||||||||||
| tlv_net_weight_label | Net weight | |||||||||||||||||||||||||||||||||||||||||||
| tlv_net_weight_unit | g | |||||||||||||||||||||||||||||||||||||||||||
| tlv_net_weight | 111 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_1_type_pack | Box | |||||||||||||||||||||||||||||||||||||||||||
| tlv_1_type_pcs_pack | Units | |||||||||||||||||||||||||||||||||||||||||||
| tlv_1_pcs_pack | 10 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_2_pcs_pack | 40 | |||||||||||||||||||||||||||||||||||||||||||
| tlv_2_type_pack | Bucket | |||||||||||||||||||||||||||||||||||||||||||
| tlv_2_type_pcs_pack | Units |
-
Product release brochure
PLA03170052_TUKTMETSCExport_8022.pdf
(-) -
AutoCAD drawing
543902 - PAU_3D_9-8_10_Sin_CAD07180268.dwg
(0.14 MB) -
AutoCAD drawing
543902_CAD02230220.dwg
(0.26 MB) -
Data sheet
DS06170129_002_ES-EN-FR-PT-AR_541302_542902_543902_544902.pdf
(-) -
Declaration of Conformity
DOC01220018_0_543902.pdf
(-) -
Technical specifications
technical_specifications_en_US_TEC09210123_543902.pdf
(0.11 MB) -
Product Sheet
543902_en_US_product_sheet_PSH01232175_543902.pdf
(-)