The wishlist name can't be left blank
PicoKom power supply for SATmix 12 V - 220 mA, 1 output

PicoKom power supply for SATmix 12 V - 220 mA, 1 output

PicoKom power supply unit 12 V - 200 mA, 2 outputs

PicoKom power supply unit 12 V - 200 mA, 2 outputs

PicoKom power supply unit 24 V - 130 mA, 2 outputs

Domestic 24 V-power supply (130 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Furthermore, it is equipped with two outputs.

Ref. 5795
Product Sheet
EAN13: 8424450140925
SKU
5795
Highlights
  • High-performance switched-mode power supply: saves up to 40% power consumption
  • Very low power consumption
  • Pleasing design and ultra-small size: can be installed in 100 mm x 100 mm connection boxes
  • EasyF connection system
  • Fully automated manufacturing, subject to the most stringent quality controls

Main features
  • Can be wall-mounted using screws
  • Through losses may vary depending on whether 1 or 2 outputs are used

Discover

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced

Plug typeEU
Number of outputs2
Frequency rangeMHz
5 ... 862
Insertion losses: 1 outputdB
1.5
Insertion losses: 2 outputsdB
4
Output voltageVdc24
Max. output currentmA130
Input voltageVac 220 ... 230
Mains frequency50 Hz / 60 Hz
Max. currentmA35
Max. power consumptionW4.4
Operating temperature°C -5 ... 45
Protection index20

Physical data

Net weight: 188 g

Gross weight: 188 g

Width: 90 mm

Height: 67 mm

Depth: 27 mm

Main product weight: 128 g

Packing

Box 1 Units

Carton 10 Units

Bucket 150 Units

More Information
tlv_tags

EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

  • Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
  • Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
  • Cost savings: no additional connectors are required (neither F nor IEC)
  • Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
  • Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device's cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.

  • Always as new: the device's operating life increases when the factor of solder wearing out with time is removed
  • Failure rate reduction: usually produced as a result of cold soldering joints
  • Electromagnetic behaviour optimization: for high frequencies
  • Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
tlv_reflog PSU242PICO
tlv_tabla_especificaciones
Plug typeEU
Number of outputs2
Frequency rangeMHz
5 ... 862
Insertion losses: 1 outputdB
1.5
Insertion losses: 2 outputsdB
4
Output voltageVdc24
Max. output currentmA130
Input voltageVac 220 ... 230
Mains frequency50 Hz / 60 Hz
Max. currentmA35
Max. power consumptionW4.4
Operating temperature°C -5 ... 45
Protection index20
tlv_diferencias Box
tlv_ean 8424450140925
tlv_dim_product_x 90
tlv_dim_product_x_label Width
tlv_dim_product_x_unit mm
tlv_dim_product_y 67
tlv_dim_product_y_label Height
tlv_dim_product_y_unit mm
tlv_dim_product_z 27
tlv_dim_product_z_label Depth
tlv_dim_product_z_unit mm
tlv_weight_product_label Main product weight
tlv_weight_product 128
tlv_weight_product_unit g
tlv_gross_weight_label Gross weight
tlv_gross_weight 188
tlv_gross_weight_unit g
tlv_net_weight_label Net weight
tlv_net_weight_unit g
tlv_net_weight 188
tlv_1_type_pack Box
tlv_1_type_pcs_pack Units
tlv_1_pcs_pack 1
tlv_2_pcs_pack 10
tlv_2_type_pack Carton
tlv_2_type_pcs_pack Units
tlv_3_pcs_pack 150
tlv_3_type_pack Bucket
tlv_3_type_pcs_pack Units

Assembly and advantages of EASYF connection system