Documentation

Gsertel is one of the leading players in the implementation of the digital terrestrial television (DTT) in Colombia. In 2017, the Televes Corporation's firm was awarded a contract to provide DVB-T/T2 monitoring equipment, which resulted in the installation of RCS equipment in 22 cities.

By means of a control centre, the infrastructure allows full real-time supervision of the signal received by the users, including critical parameters such as spectral emission, impulse response, quality of the DVB-T2 signal, and DVB frame content supervision. Thus, the National Television Authority of the Republic of Colombia was able to deploy services of higher added value and quality all over the country, while significantly reducing the incident solution time.

The project was funded by the European Union. through an agreement for the upgrading of DTT infrastructure in the Latin American country.

The experience meant a significant boost for Gsertel in Latin America, thanks to the fact that the monitoring technology used is compatible both with the DVB-T/T2 standard used in Colombia and the ISDB-T/Tb standard present in most countries in the region.

The technology used is compatible with both the DVB-T/T2 standard and the ISDB-T/Tb standard, present in most countries in the region.

www.televescorporation.com

One of the main requests from the Coaxdata installers is to have a centralized and fast software tool for the management of a Coaxdata network. One of the main requests from the Coaxdata installers is to have a centralized and fast software tool for the management of a Coaxdata network.

Since we deal with a layer 2 architecture, in principle Coaxdata does not allow for a remote IP connection with the slave devices.

The solution is CoaxBox ref.769330): a device capable of generating a DHCP service to provision, manage and monitor all the devices in a CoaxData network.

Located in the Sinai peninsula, the Renaissance hotel is part of the Marriott hotel chain The resort spreads horizontally and has one and two-floor housing modules.

It is equipped with an Arantia TV system, which consists of:

3 HE21 HEADENDS, which amounts to 34 DVB-S2 satellite transponders (10 of which have decoding capacity).

1 CORPORATE CHANNEL included in an HE21 headend.

2 ENCODERS 8 x HDMI to IP

1 MIDDLEWARE with a personalized interface exclusive for the Marriott hotel chain.

1 LIVE MULTISCREEN TRANSCODER

The equipment provides services to 536 endpoints.

Besides the TV channels, each endpoint has Youtube and Miracast application access through the user interface.

Egypt installer company:
AMS (Advanced Multimedia Systems)

Details matter. MOSAIQ6 has an innovative interface specifically designed to get the most out of the 8" multi-touch screen that allows the user to interact with the meter in a simple and intuitive way: it includes all the bells and whistles to provide optimum usability. It is a REAL touch screen that takes all possible advantage of the up to 7 gesture commands described below:

	TAP (TAP): One quick finger touch. To select a menu option, for example, or to display a drop-down list in an option.
	DOUBLE TAP (DOUBLE TAP): Two quick consecutive taps with one finger. For example, to access a function in the mosaic mode and display it on the full screen.
	DRAG (DRAG): Long slide with a single finger. To shift between modes, for example from measurement mode to mosaic mode.
	SWIPE (SWIPE): Short slide with a single finger. For example, to access the menus marked with arrows (?, ? or ?) or to shift channels in spectrum mode.
	PINCH (PINCH/SPREAD): Pinch/spread two fingers on the screen. To modify span, making it shorter or larger.

After the overview of the 7 gestures used in MOSAIQ6, lets have a look at a practical example to show how to get the most out of them.

The lower bar has several shortcuts that allow you to make quick modifications with only one click (TAP) . One single touch (TAP) in the lower area allows you to shift from the satellite to the terrestrial band, switch from channel to frequency, store a macro-log file, or go back to the main menu at any time (inter alia). If the arrow in the lower area is selected (TAP), the meter launches a "learning plan“, and analyses all the channels detected in the selected band. Once the table with all the channels and measurements (power, C/N, MER, etc.) is produced, you can scroll over it with a short slide (SWIPE) and select a specific channel with a single touch (TAP).

To shift from the scan screen mode to any of the other two (mosaic 6 or mosaic 3) a long slide with a single finger is required (DRAG).

Once in mosaic mode, you can access one of the menus and have it displayed on the full screen with a double tap (DOUBLE TAP). Going back to the previous mode is as easy as double tapping again (DOUBLE TAP). Each of the menus in the mosaic mode can be switched just by pushing the orange arrow (TAP) and selecting the desired menu (TAP).

You can enter the spectrum mode, for example, by double tapping on the appropriate window (DOUBLE TAP). Once inside, modifying the span is as easy as pinching with two fingers (PINCH) (to reduce span) or to spread them (to increase span) (SPREAD). To switch channels (frequency) is as simple as touching the spectrum with a short forward slide of one finger (next channel), or a back slide (previous channel) (SWIPE).

Thanks to the touchscreen interface and the gesture commands, MOSAIQ6 becomes a high-performance portable meter, highly intuitive and automated: The power of user experience.