Lower section pivoting, Zinc + Painting 180 tower
3m lower section for the erection of a 180 series tower.
Guy wires are required for pivoting sections.
The section is painted white.
Ref. 303702
EAN13:
8424450152416
SKU
303702
Highlights
- Anchoring system with union nuts
- Easy and quick mounting
- Fully automated soldering
- 180 tower maximum height: 26.5m (as per calculation conditions)
- Zinc coating + colour paint: oven-lacquering with polyester electrostatic powder
- Main tubes of 20*2 mm and transverse rods of 6 mm
| Surface facing the wind | m² | 0.274 |
|---|
Physical data
Net weight: 12,500 g
Gross weight: 12,500 g
Width: 180 mm
Height: 3,000 mm
Depth: 165 mm
Main product weight: 12,796 g
Packing
Unit 1 Units
| tlv_tabla_especificaciones |
|
|||
|---|---|---|---|---|
| tlv_ean | 8424450152416 | |||
| tlv_dim_product_x | 180 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 3,000 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 165 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 12,796 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 12,500 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 12,500 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright
position and levelling it. The subsequent Middle Sections are then
mounted, equipped with the appropriate guy wires; the mounting is
carried out by climbing on the previously mounted sections and hoisting
the new section with the help of the appropriate lifting tools.