Upper section, Hot-Dip Galvanizing + Painting 450 tower
3 m upper section for the erection of a 450 series tower.
The section is painted red (RAL 3020).
- Anchoring system with union nuts
- Fully automated soldering
- 450 tower maximum height: 90 m (as per calculation conditions)
- The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
- Colour paint, oven-lacquering with polyester electrostatic powder
- Mast max. diameter: 62 mm
| Surface facing the wind | m² | 0.518 |
|---|
Physical data
Net weight: 35,000 g
Gross weight: 35,000 g
Width: 515 mm
Height: 2,947 mm
Depth: 446 mm
Main product weight: 34,432 g
Packing
Unit 1 Units
| tlv_reflog | TOBER450R | |||
|---|---|---|---|---|
| tlv_tabla_especificaciones |
|
|||
| tlv_ean | 8424450136836 | |||
| tlv_dim_product_x | 515 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 2,947 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 446 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 34,432 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 35,000 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 35,000 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.