The wishlist name can't be left blank
Multifunctional Actuator for electrical switchboard

Multifunctional Actuator for electrical switchboard

Concentrator for electrical switchboard

This is the main element for remote management at electrical switchboard level, it must be installed together with the Actuator (ref.692010).

It allows control of the electrical switchboard, managing lines of luminaires in a practical and simple way. The greatest advantage of the switchboard control is the consumption supervision. As it is located at the same metering point as the electricity company, it allows bills to be compared with actual consumption. Other key functions are the monitoring of the electrical network, to detect possible anomalies in the network and optimize maintenance, and the management of the switching on or off of lines, improving the efficiency of the lighting system.

The concentrator panel combines a three-phase electricity meter, a high-performance processor and direct communication with the cloud to exploit the usefulness of the data collected. It operates as an information gateway to the remote management platform, allowing monitoring and acting on luminaire lines.

Several communication interfaces are available. Our system includes wireless connectivity, via 2G, 3G or 4G, for 1 year. In addition, connection via Ethernet cable (twisted pair) is also supported.

Ref. 692001
Product Sheet
EAN13: 8424450231166
SKU
692001
Highlights
  • Real-time clock (RTC): keeps the entire system on time, and responds in time to all scheduled events and actions, even after loss of communication with the platform
  • Memory and data storage of all recorded values for 1 year
  • Battery back-up: allows alarm to be sent in the event of a power loss, as well as eases controlled disconnection so as not to compromise the database
  • Class I three-phase meter: provides detailed information on the parameters necessary for efficient energy management (currents, voltages, power factor, power, etc.)
  • High speed 1GHz processor with 1Gb of RAM and up to 16Gb of Flash
  • Wireless communications available 2G (GPRS, GSM), 3G, 4G
  • Bi-directional 10/100 Mb/s Ethernet interface operating in auto MDI/MDIX modes and with RJ-45 connector
  • Open door detection
  • RS-485 communication interface (MODBUS)
  • API RESTful to facilitate system integration in any protocol of other management platforms
  • DIN rail installation

Single-phase input range
Vac 100-277
Input frequency
Hz 50/60
Max. power consumption W 15
Power factor >0.80

Ethernet Modes

10/100 Mbps
MDI/MDIX Yes
Full Duplex Yes
Mobile connection
2G (GPRS, GSM), 3G, 4G
Operating temperature ºC -25 ... 55

Physical data

Net weight: 1,041 g

Gross weight: 1,142 g

Width: 225 mm

Height: 105 mm

Depth: 30 mm

Main product weight: 809 g

Packing

Box 1 Units

More Information
tlv_reflog RMC
tlv_tabla_especificaciones
Single-phase input range
Vac 100-277
Input frequency
Hz 50/60
Max. power consumption W 15
Power factor >0.80

Ethernet Modes

10/100 Mbps
MDI/MDIX Yes
Full Duplex Yes
Mobile connection
2G (GPRS, GSM), 3G, 4G
Operating temperature ºC -25 ... 55
tlv_ean 8424450231166
tlv_dim_product_x 225
tlv_dim_product_x_label Width
tlv_dim_product_x_unit mm
tlv_dim_product_y 105
tlv_dim_product_y_label Height
tlv_dim_product_y_unit mm
tlv_dim_product_z 30
tlv_dim_product_z_label Depth
tlv_dim_product_z_unit mm
tlv_weight_product_label Main product weight
tlv_weight_product 809
tlv_weight_product_unit g
tlv_gross_weight_label Gross weight
tlv_gross_weight 1,142
tlv_gross_weight_unit g
tlv_net_weight_label Net weight
tlv_net_weight_unit g
tlv_net_weight 1,041
tlv_1_type_pack Box
tlv_1_type_pcs_pack Units
tlv_1_pcs_pack 1