The wishlist name can't be left blank

Passive optical receiver, with WDM 1310/1490/1550nm

Passive receiver that captures an optical signal on a single fiber (1310/1490/1550nm), and demultiplexes it (WDM). The TV signal (1550nm) is converted to an RF output (54-2400MHz), while the 1310/1490nm wavelengths are destined to data signals (GPON) to distribute them through its optical port.
Ideal for applications FTTH/FTTR and as a RF Overlay receiver in GPON networks.
Ref. 237330
Product Sheet
EAN13: 8424450213711
SKU
237330
Highlights
  • Stable RF signal output level
  • DIN rail or wall installation
  • Compact and resistant ABS plastic case, white colour (RAL 9003)

Main features
  • SC/APC optical connectors
  • F-type RF connector

 RF Output
RF connector F-Female
Bandwidth MHz 54 - 2400
Impedance Ohm 75
Flatness dB ± 2
Output level
dBμV 58 (DTT)
49 (SAT)
Optical input/output
Number of ports
1 COM bidirectional
1 GPON bidirectional
Wavelength nm 1310 & 1490 <> GPON
1310 & 1490 <> COM
1550 < COM
Maximum optical input power
dBm +2
Minimum optical input power recommended
dBm -5
Optical return losses
dB > 40
Optical connectors
SC/APC
Type of optical device
InGaAs pin photodiode
General
Operating temperature
ºC -5 ... +45
Protection index
IP30

Physical data

Net weight: 100 g

Gross weight: 110 g

Width: 119 mm

Height: 107 mm

Depth: 33 mm

Main product weight: 100 g

Packing

Box 1 Units

More Information
tlv_reflog UOU1550
tlv_tabla_especificaciones
 RF Output
RF connector F-Female
Bandwidth MHz 54 - 2400
Impedance Ohm 75
Flatness dB ± 2
Output level
dBμV 58 (DTT)
49 (SAT)
Optical input/output
Number of ports
1 COM bidirectional
1 GPON bidirectional
Wavelength nm 1310 & 1490 <> GPON
1310 & 1490 <> COM
1550 < COM
Maximum optical input power
dBm +2
Minimum optical input power recommended
dBm -5
Optical return losses
dB > 40
Optical connectors
SC/APC
Type of optical device
InGaAs pin photodiode
General
Operating temperature
ºC -5 ... +45
Protection index
IP30
tlv_ean 8424450213711
tlv_dim_product_x 119
tlv_dim_product_x_label Width
tlv_dim_product_x_unit mm
tlv_dim_product_y 107
tlv_dim_product_y_label Height
tlv_dim_product_y_unit mm
tlv_dim_product_z 33
tlv_dim_product_z_label Depth
tlv_dim_product_z_unit mm
tlv_weight_product_label Main product weight
tlv_weight_product 100
tlv_weight_product_unit g
tlv_gross_weight_label Gross weight
tlv_gross_weight 110
tlv_gross_weight_unit g
tlv_net_weight_label Net weight
tlv_net_weight_unit g
tlv_net_weight 100
tlv_1_type_pack Box
tlv_1_type_pcs_pack Units
tlv_1_pcs_pack 1

Mounting details

The device has two fixing ways:
  • Wall: using the supplied screws
  • DIN rail: to use the DIN type anchor, you must remove the pre-cut tabs that holds the cover

Once affixed the device, you must insert the cover above the base and screw it. Afterwards, you will be able to put the definitive identifying label, as well as the protector plastic of the same. On the label, there is a location available for identifying the device or point to which it provides service.