Top mast holder, Hot-Dip Galvanizing + Painting 550 ULTRA tower - Reinforced
- Anchoring system based on plates and union nuts
- Outstanding stiffness and mechanical strength
- Solid tube, no internal corrosion
- Maximum height of the 550 ULTRA tower: 200 m (as per calculation conditions)
- The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
- Colour paint, oven-lacquering with polyester electrostatic powder
- Mast max. diameter: 62mm
| Surface facing the wind | m² | 0.037 |
|---|
Physical data
Net weight: 20,000 g
Gross weight: 20,000 g
Width: 700 mm
Height: 250 mm
Depth: 638 mm
Main product weight: 16,000 g
Packing
Unit 1 Units
| tlv_reflog | TOBER550XL | |||
|---|---|---|---|---|
| tlv_tabla_especificaciones |
|
|||
| tlv_diferencias | Reinforced top mast holder red (RAL 3020) 0.25m | |||
| tlv_ean | 8424450181249 | |||
| tlv_dim_product_x | 700 | |||
| tlv_dim_product_x_label | Width | |||
| tlv_dim_product_x_unit | mm | |||
| tlv_dim_product_y | 250 | |||
| tlv_dim_product_y_label | Height | |||
| tlv_dim_product_y_unit | mm | |||
| tlv_dim_product_z | 638 | |||
| tlv_dim_product_z_label | Depth | |||
| tlv_dim_product_z_unit | mm | |||
| tlv_weight_product_label | Main product weight | |||
| tlv_weight_product | 16,000 | |||
| tlv_weight_product_unit | g | |||
| tlv_gross_weight_label | Gross weight | |||
| tlv_gross_weight | 20,000 | |||
| tlv_gross_weight_unit | g | |||
| tlv_net_weight_label | Net weight | |||
| tlv_net_weight_unit | g | |||
| tlv_net_weight | 20,000 | |||
| tlv_1_type_pack | Unit | |||
| tlv_1_type_pcs_pack | Units | |||
| tlv_1_pcs_pack | 1 |
Mounting details
It consists in fixing the lower section to the base, set it in upright position and levelling it. The subsequent Middle Sections are then mounted, equipped with the appropriate guy wires; the mounting is carried out by climbing on the previously mounted sections and hoisting the new section with the help of the appropriate lifting tools.