AVANT X Basic programmable multiband amplifier for terrestrial and satellite signals, with 32 digital programmable filters
AVANT X Basic programmable multiband amplifier for terrestrial signals, with 32 digital programmable filters
AVANT X Basic programmable multiband amplifier for terrestrial and satellite signals, with 32 digital programmable filters
A new evolutionary stage
Multi-input multiband amplifier, perfect for terrestrial individual or MDU (Multi Dwelling Unit) installations, that allows programming up to 32 digital filters on 4 VHF+UHF inputs (DTT). The multiband amplifier is equipped with 6 inputs, allowing its configuration between 2 distribution modes: FM-4xVHF/UHF-SAT or FM-DAB-3xUHF-SAT, and can achieve programmable amplification and balancing of the different RF inputs. Equipped with 2 outputs: one terrestrial and one terrestrial+satellite.
Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows application.
The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 48 (LTE700).
Digital processing technology implemented on terrestrial TV signals
Up to 32 individually programmable filters: single channel digital filtering, even for adjacent channels (1 to 4 channels)
Digital processing of channels: output channels can be frequency shifted
Automatic signal adjustment in each filter (AGC): and output signal manual regulation
UHF/VHF digital filters with high selectivity: 30dB rejection (@ 1MHz)
SAW filters (Surface Acoustic Wave) against LTE interferences, with the best selectivity and stability
Compatible with DVB-T and DVB-T2
TForce Technology: terrestrial signal level always stable and adapted to its optimum value
Storage of several setups and cloning between different AVANT X models
Zamak chassis provides high screening effect
Light-weight and compact multiband amplifier with a wide range of features (225x120x55mm)
Very easy configuration and adjustment using ASuite application for Android or Windows
Main features
Inputs configurable in 2 modes: 4 inputs support VHF/UHF, or one of the inputs is for DAB and the remaining 3 for UHF
Automatic balancing according to the programmed output level and equalization slope
High output power
Allocation of filters to inputs without restraints
Powering of pre-amplifiers or BOSS system
LED indicators displaying both unit and signal statuses
Easy-to-replace power supply
Two powering modes on the SAT input: local or remote
Discover
Avant X: A new evolutionary stage
Avant X is a full range of digital programmable multiband amplifiers, which main mission is to achieve a programmable amplification and balance of different RF input signals.
VHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any VHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels. The arrangement of the 32 filters is configurable based on the number of channels present on each VHF+UHF input. It's compatible with DVB-T and DVB-T2. The output level is programmable between 90-115dBμV for one-output options (BASIC and PRO), and between 86-111dBμV for two-output options (BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can be programmed at the output.
The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
IF input (only for models equipped with SAT): satellite input can be assigned an attenuation between 0 dB and 30dB, and an equalization between 0 dB and 15dB. The LNB can be configured to be REMOTELY (user STB) or LOCALLY powered by enabling the 22 kHz tone and configuring the supply voltage value to 13 or 17 V.
Choose the desired programming mode...
Avant X provides three different programming options:
App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored - even without being connected to the multiband amplifier - only to retrieve it at installation and adjustment time. Furthermore, for PRO versions, the application allows the monitoring of the quality parameters and the production of an installation report describing the configuration used.
Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.
Automatic programming by means of the "AUTO-PROGRAMMING" button (press and hold) of the multiband amplifier itself (PRO versions only): Thanks to a tuner that is able to detect DVB-T/T2 channels for UHF+VHF inputs, the unit performs an automatic programming of the filters when executing this option, as well as the appropriate tuning to avoid intermodulation.
By pressing the READJUST button (short press), the unit is readjusted to the stored configuration values. After the multiband amplifier is adjusted, a manual fine tuning can be performed to slightly correct the VHF/UHF and FM filters' gain.
Number of inputs
6
Number of outputs
2
Bands
FM
DAB
UHF
SAT
Frequency range
MHz
87 ... 108
174 ... 230
470 ... 694
950 ... 2150
Number of filters
--
1
31
--
Channels per filter
--
--
1 ... 4
--
Gain
dB
25
71
71
41
Gain adjustment range
dB
0 ... 25
AGC
AGC
0 ... 30
Manual regulation after auto-adjustment
dB
-5 ... 5
-5 ... 5
-3 ... 3
--
Slope regulation
dB
--
--
0 ... 5
0 ... 15
Input level
dBμV
76 ... 101
40 ... 100
40 ... 100
--
Output level DIN45004B
dBμV
118
118
118
--
Output level EN50083
dBμV
122
122
122
123
Programmable output level
dBμV
76 ... 101
83 ... 108
86 ... 111
--
Noise figure
dB
7
7
6
--
Selectivity
dB
> 20
> 65
> 65
> 40
Powering per inputs
Vdc
--
12
12
13 ... 17
Max current input
mA
--
70
--
--
Max. local current for LNB
mA
200
Max. remote current for LNB
mA
400
Input voltage
Vac
110 ... 230
Mains frequency
50 Hz / 60 Hz
Max. current
mA
350
Max. power consumption
W
20
Protection index (IP)
20
Operating temperature
°C
-5 ... 45
Physical data
Net weight: 841 g
Gross weight: 841 g
Width: 226 mm
Height: 120 mm
Depth: 53 mm
Main product weight: 920 g
Packing
Box 1 Units
More Information
tlv_tags
Avant X: A new evolutionary stage
Avant X is a full range of digital programmable multiband amplifiers, which main mission is to achieve a programmable amplification and balance of different RF input signals.
VHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any VHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels. The arrangement of the 32 filters is configurable based on the number of channels present on each VHF+UHF input. It's compatible with DVB-T and DVB-T2. The output level is programmable between 90-115dBμV for one-output options (BASIC and PRO), and between 86-111dBμV for two-output options (BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can be programmed at the output.
The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
IF input (only for models equipped with SAT): satellite input can be assigned an attenuation between 0 dB and 30dB, and an equalization between 0 dB and 15dB. The LNB can be configured to be REMOTELY (user STB) or LOCALLY powered by enabling the 22 kHz tone and configuring the supply voltage value to 13 or 17 V.
Choose the desired programming mode...
Avant X provides three different programming options:
App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored - even without being connected to the multiband amplifier - only to retrieve it at installation and adjustment time. Furthermore, for PRO versions, the application allows the monitoring of the quality parameters and the production of an installation report describing the configuration used.
Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.
Automatic programming by means of the "AUTO-PROGRAMMING" button (press and hold) of the multiband amplifier itself (PRO versions only): Thanks to a tuner that is able to detect DVB-T/T2 channels for UHF+VHF inputs, the unit performs an automatic programming of the filters when executing this option, as well as the appropriate tuning to avoid intermodulation.
By pressing the READJUST button (short press), the unit is readjusted to the stored configuration values. After the multiband amplifier is adjusted, a manual fine tuning can be performed to slightly correct the VHF/UHF and FM filters' gain.