DK6000 data cable U/UTP Cat 6 Cca LSFH 23AWG

• U/UTP Unfoiled UTP Cable
• Solid copper inner conductor (23AWG)
• Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices
• PE (Polyethylene) copper conductor insulation, 1.02mm diameter
• LSFH (Low Smoke Free of Halogen) outer sheath, 0.50mm thick and 6.2mm diameter
• 72% nominal speed
• Certified by Intertek (ETL Verified Mark)

Category 6

Data cable category Cat 6 complies with the standard for Gigabit Ethernet and it is backwards compatible, with the standards of the inferior categories (Cat 5/5e and Cat 3). Category 6 evolves over category 5E, allowing to achieve transmission frequencies of up to 250 MHz (in each pair) and 1 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T and 1000BASE-T (Gigabit Ethernet) compliant systems.

Our category 6 cables are characterized:

• Comply with TIA/EIA-568B.2-1
• Crucifix type padding
• Transfer rate up to 1Gbps
• Frequency range of up to 250 MHz and up to 400MHz in some references
• Includes rip cord to make it easier to strip the cable
• Nominal impedance of 100 ohms
• Maximum resistance per conductor below 9.38 ohms/100m

Compatibility of RJ45 connectors with Televes data cables:

OK Compatible
OK* Compatible, but there are better choices
X Incompatible
** Mechanical compatibility