Precision stripper for optical fiber, with 4 working areas

Stripping and cutting tool for fast, safe and precisv removal of both the sheath and the different coatings applied on the fiber (900 and 250µm).

It has 4 working zones, so that:

• Cutting zone (4): It facilitates the cutting of the fiber or its outer sheath, thus avoiding the exchange between tools and therefore having a direct impact on working times
• Fiber cover removal zone (3): Allows the removal of fiber covers between 3 and 1.6 mm in diameter, thus allowing access to the fiber in question
• Zone for the extraction of the 900µm protection/coating (2): By means of this zone we can remove the 900µm protection/coating, reducing the diameter of the protection to 250µm
•  Zone for the extraction of the 250µm protection/coating (1): By means of this zone, we can remove the protection/coating, reducing the fiber diameter to 125µm (working diameter for fusion)
  

Its factory pre-calibrated cutting and extraction blade is designed to avoid scratches or cuts in the fiber, ensuring a quality finish.
It has an automatic return system at maximum opening (spring), to facilitate the work and reduce times. In addition, it incorporates a safety lock to avoid possible injuries during transport, also ensuring a minimum transport occupation.

Supplied in individual bags.